OpenSkan: Open Source Full Body 3D Scanner

954480_10200938269155906_221499115_n


Its no secret what I’ve been working on in my free time this year. I’m proud to say, after neglecting it for awhile, I’ve completed a functioning prototype for the OpenSkan full body scanning rig. I do say prototype, because I have a few parts to strengthen and replace, but as far as form and function, its there. I’ve got plenty of pics and a video posted after the break showing all the inner workings, a friend being scanned, and some prints.

 

As it stands now, I’m controlling the linear column and rotating platform manually through changeover switches, in a project box enclosure that I gutted from an old robot I made to teach students. Unfortunately I bricked my Arduino, so once that gets re-programmed I’ll have the column running with speed control for smoother scans and full automation.

So far I’ve managed to keep the costs low. Everything you see is either lasercut, 3D printed, or cut on a bandsaw. Once I work out the kinks I’ll be posting all the files. There are some pics, in the photoset below, that show some of the 3D printed assemblies, including a nifty winch I’m proud of. Keep in mind however, I modeled most of these more recent parts in 10 minutes or less.

Right now I’m using Reconstructme to acquire the scans through the kinect. I’ll be switching software as soon as I get a full license of Skanect, since its pricey for a broke University student. I also hope to get my hands on an Asus Xtion.

What does the future hold?

The platform is going to be strengthened and given a makeover with a fancy LED lighting system. The column will be replaced with two 4ft pieces of 1 X 1 t-slot extrusion and given added strength and stability. I’ll be bringing this bad boy out to some local events to build some interest (and some funds for more research). There are also some more OpenSkan products in the works, so keep your eyes peeled!

One more thing to note! A proper OpenSkan website is in the works. We’ll be creating a one stop place for information and plans on any and all types of open source homebrew scanning equipment.

www.openskan.org

Awesome Flickr Gallery Error - SSL is required

6 comments

  1. [...] Labs’ Moheeb Zara built this full body scanner with a Kinect that raises and lowers on a gantry while a turntable rotates the subject. The [...]

  2. [...] Labs’ Moheeb Zara built this full body scanner with a Kinect that raises and lowers on a gantry while a turntable rotates the subject. The [...]

  3. John S says:

    Awesome work Moheeb. Very inspiring! Keep on discovering.

    John

  4. [...] VLRevolution: I’m proud to say, after neglecting it for awhile, I’ve completed a functioning [...]

  5. [...] Zara] is still in development with a Kinect based full body scanner. But he took a bit of time to show off the first working prototype. The parts that went into the [...]

  6. [...] Zara] is still in development with a Kinect based full body scanner. But he took a bit of time to show off the first working prototype. The parts that went into the [...]

Leave a Reply

Your email address will not be published. Required fields are marked *

*